Hexagon doll quilt: a finish

I’ve finally finished my hexagon doll quilt!  I’ve only been working on this since, what, February?

For the quilting, I attempted wood grain quilting within the trunk and branches of the tree.  Then I went all the way around the edge of the tree, in a pale blue.

I did wavy lines across the “sky, which I extended into the border, and curved lines – switching to a variegated yellow/green thread – in the “ground.”

Do you recognize the binding?  It’s from this quilt.

I had decided ages ago to sew buttons onto the quilt to be “fruit.”

The finished front:

The pieced back, using pieces from my stash.  I love how the oranges play together.

 

Advertisements

Pink Blossom: Part IV

Here’s part IV of “Pink Blossom”: the pieced back and the binding.

I pieced the back out of baby-themed flannel I had.  I used squares I’d bought years ago at a fabric store with a nickel scrap bin (boy did I love that!), which I cut to uniform size and sewed into rows, and then I used larger pieces to make the rest.

I went sans batting because they live in a relatively warm climate and I figured she wouldn’t need it. (Plus my mom put batting in hers so they’ll have a heavier quilt if they need one.)

The binding is from two more pinks that I’d ended up not using, a solid from the same keepsake quilting collection and a pink polka dot. It coordinates nicely and again ties in the polka dots.

I hand stitched the binding down with matching pink thread. I haven’t labeled the quilt yet; I like to put the baby’s birth date and my niece is a couple of months away from hers. My plan is to take the label down with me when we visit and sew it on then.

Want to see some pictures of the quilting from the back?  Of course you do!

Lastly, here’s a shot of the finished quilt.  (That’s my dad modeling it for me.)

Pink Blossom: Part III

Happy Tuesday, habibis!  It’s time for part III of Pink Blossom – I want to show you the rest of the quilting I did, on the three outer borders that I designed myself.

For the next border I quilted straight lines in pink.  For the woven-look border I quilted two straight lines in pink in the pink sections and two wavy lines in teal in each teal section.

I quilted through the corners like this:

For my final border I quilted each fabric differently. For the pieces leftover from my woven-look border, I quilted straight lines going out to the edge of the quilt in matching thread.

For this pink, I quilted wavy lines in coordinating pink thread.

For this pink, I quilted a “rainbow” in straight lines, because I liked how the teal looked against the print and the print had almost all the colors in it. The rainbow is teal, then yellow, then light pink, then two lines of the hot pink.

For the yellow fabric I did two different things. On the top and bottom borders I used a saucer to trace a half circle and then quilted the circle, then quilted two more circles a quarter inch above each one.

For the other two borders I did quilted the semicircle and then quilted straight horizontal lines  a quarter inch apart within the semicircle. (I did that because on the side borders the yellow prices were wider, so I could get a larger arc.)

Bobbin thread thoughts:   I mostly used white bobbin thread, rather than coordinating thread like I usually do. Since I switched top thread a lot, using white bobbin thread made things a little easier. I wasn’t constantly switching out my bobbins or needing to have five or six colors wound at any given time. (I used light pink, a deeper pink, yellow, green, teal, and cream threads on this quilt.)  However, I was having some tension problems and I found that for the deeper pink and the teal, in particular, the bobbin thread showed, which really bothered me. I ended up using matching bobbins for those colors as the quilting went on.

Tomorrow I’ll share the pieced back and the scrappy binding!

 

Pink Blossom: Part II

The quilting for baby H’s Pink Blossom quilt is going to be two posts. I quilted this a lot. I even ripped out some handstitches I’d done and quilted in its place. The reason I quilted so much – and concentrated it in certain areas – is because I was concerned that my hand stitching wouldn’t hold. If I had just kept the quilt for myself I wouldn’t mind; if something broke I could fix it. However, since I was giving it away – and as a baby quilt, no less – I wanted to make sure everything would stay put. Baby quilts get a lot of wear and tear and washing and I didn’t want to worry about the quilt falling apart.

I started from the center and worked outward. The dogwood blossom had been appliquéd on using fusing and a blanket stitch. I quilted freehand in the center of the blossom using coordinating pink thread.  I went around the inside edges of the “petals.” Then I sewed curves from the inside corner of each petal, first concave and then convex. (Or vice versa?)  It’s not perfect because I did it freehand, but I don’t think anyone will mind. Then I quilted around the outside edge of the shape, still in pink.

A section of my blanket stitch had broken, so I fixed that by hand.

Later, I realized more of my blanket stitching wouldn’t hold. I took out almost a whole petal’s worth. The rest seemed fine, so I debated simply restitching it by hand, but out of concern that the rest of the blanket stitch might break at some future point I ripped it all out and did a zigzag stitch in blue, which is what I’d used originally for the blanket stitch.

The fabric I’d used for the base of the dogwood blossom appliqué is very light and I think it stretched when I was doing the appliqué. I hadn’t squared it up, I don’t think, before I added the next border – and as you’ll recall, I’d struggled with the mitred corners, which may have been the bigger issue. Regardless, the center wasn’t flat. When I started to later the quilt I did my best to get it as flat as possible and I pinned the excess under the mitred border. To hold it in place, I zigzagged along that whole edge in pink thread. It helped a lot, but it’s still not perfect.  It should be visible above.

For the mitred border I did freehand curved lines in cream thread. I have to say, I love this fabric, which I don’t use very much.

The next border was the one with the jewels embroidered in satin stitch. This is the only hand stitching that I didn’t end up quilting over, because I didn’t know how to do it in a way that will still look good. So I expect the embroidery thread on the jewels to come out at some point. I’m going to visit my brother and his family around Christmas and when I do I’ll see how the quilt is faring and tell them I’ll fix whatever breaks in the future.

In the blocks around the jewels I stitched straight lines in all the teal HSTs with matching thread. Then I stitched straight lines in the yellow HSTs next to the jewels, in yellow thread, just to hold everything in place.  In the above pictures, I hadn’t done the quilting in the yellow triangles.

In the next border I did cream wavy lines again. This fabric is from the same collection as the other border.

Next is the last border I put on using the Handstitched class instructions, with the English paper pieced storm at sea blocks.  I started with the borders themselves. In one I used a saucer to trace curves along the top and bottom and then two sets of curves that meet up in the center. That was too much marking, so in the other polka dot sections I quilted wavy lines, all in yellow thread.

In the corner pieces, the storm at sea blocks, I used yellow thread to sew approximately quarter inch lines around the seams. At the edges I marked some of them to go into the next border. It looks like this:

Later I got nervous that this wasn’t enough quilting, that my hand piecing stitches might break and the rough edges come loose.  (You can see them in the above picture – visible stitches!) To prevent that, I went back to these blocks and stitched, not in the ditch, but in the seam allowances, using matching thread for each color so it would blend in.  I don’t seem to have taken pictures of that.

 

Pink Blossom: Part I

Hi habibis! Happy Labor Day to those of you in the US!

Remember this quilt? When you saw it last I needed to add the English paper piecing storm at sea blocks. In July I finally pulled out the blocks and the yellow and white polka dot fabric that I’d cut to comprise the rest of the border. I decided I was sick of this quilt and I was going to make a doll quilt out of it. Then I measured it after I put the border on and it was way too big for a doll quilt. What to do?

At the same time, I’d been ruminating over what quilt to make for my baby niece. My brother and sister-in-law are expecting their first child later this year, a baby girl. Baby H will be the first grandchild on both sides and her arrival is eagerly anticipated. We had the shower planned for Labor Day and my mother said she was going to have her quilt done by the shower, so I figured I’d better have mine done by then, too.

Then I had a brilliant idea. My sister-in-law M loves pink. My Handstitched quilt had a lot of pink, plus teal and yellow – great baby colors! Why not make it the quilt for baby H?

I pulled out all my pink fabrics and auditioned them with what I had already to design my additional borders. I’d already decided to move away from the instructions from the class. The quilt as designed wasn’t what I wanted to make. (I’ve learned from now on not to take a class unless I really want to make the design. Something can be great but not speak to me, you know?)

I used a fabric with large dots in shades of pink red and black for the next border. It ties in the pinks in the quilt and the polka dots (which, of course, I love).

For the next border I envisioned a cool weaving effect with teal and pink. This teal, by the way, is a michaels purchase that I used here. I believe the pink is from a keepsake quilting collection of pink solids.  I had to be creative to get my design out of diminishing teal scraps but I love that I was able to achieve it.

For the final border I used some hot pinks with extra scraps from the other borders.

 

You can see a shift in colors from the center, which has some greens and creams, to the outer borders, which are heavily concentrated in pink with pops of teal and yellow, but I think it still works and feels cohesive because I have a spectrum of pinks throughout and I used the same teal in everything. I’m very happy with the aesthetic.

Tomorrow I’ll share some of the quilting!

 

Hexagon Tree Doll Quilt – Part IV

Habibis, I promised I’d get better about posting regularly, and then Z and I went away for a long weekend and I forgot to set up my posts in advance!   We got home too late last night for me to post, but here’s an update on my hexagon tree doll quilt: I’ve started to fill in some of the “leaves” in shades of yellow, green, and blue.

Apologies for the poor quality of the photo – I took it on my lap, on the train, after dark.

I’m not really sewing with a deadline on this one – just whenever I get a chance to pick it up I do a bit.  I have two projects I’m working on that I can’t share yet, but hopefully in August I’ll get more sewing time and have a burst of creativity!